Autel IM508S Add 2022 Jeep Compass SGM Smart Key Success

---

We're on a 2022 Jeep Compass, trying to add a key with the Autel IM508S Key Programmer. The gateway module is right behind the panel with white label. We need to unplug it and connect with a 12+8 bypass cable. You can also use the Autel IM608 II tablet to finish the job.

Now let's get start.

IMMO >> Jeep >> Manual selection >> North America >> Compass >> 2021–2023 >> Smart key >> Yes

If you have a learned key, turn on the ignition.

Control unit >> Read immobilizer password >> Read immobilizer password(CAN)

Turn the ignition off, and turn the hazards on.

Please make sure the device has connected WiFi OK, and the IP has been obtained successfully.

Programming BOOT2…

The read password is 95377.






Keyless system(CAN) >> Key learning >> Add key

Please place the smart key on the central lock(near the shift bar), make sure the ignition is OFF.

Make sure all wireless devices(laptops, cell phones, other fob keys) are not close to the smart key being programmed.

Make sure all doors are closed.

This procedure will add a new smart key WITHOUT erasing the programmed.

Autel MaxiIM IM508S Notice:

The new key must be the OEM smart key(with 4A chip) of the current model.

Press "OK".

Notice: The new key must be the OEM smart key(with 4A chip) of the current model.

Current number of keys: 2

Do you want to continue to learn the key? Yes

Please enter & confirm password: 95377

Please place the smart key on the central lock(near the shift bar), make sure the ignition is OFF.

Press and release the Unlock button once per 15s in 60s.

Current number of keys: 3

Learning successful.

Test the new key, lock and unlock are all perfect.

Done.