Autel IM608 PRO2 Program 2020 Acura TLX All Smart Keys Lost
Autel IM608 PRO2 Program 2020 Acura TLX All Smart Keys Lost
Today I'm working on a 2020 Acura TLX with all smart keys lost. It's a push-to-start vehicle. Following I'm gonna use the Autel IM608 PRO2 to program a key for it.1. Generate Key
Put an Autel Universal Key into XP400 PRO programmer.
Universal key >> Accept >> Universal key generation >> North America >> Acura >> Type by model >> TLX >> 2020 >> Acura TLX 2018–2022 >> Generate universal key
Universal key generation is completed.
2. Program All Keys Lost
IMMO >> Accept >> Acura >> OK >> Manual selection >> TLX >> Push to start >> OK >> Control unit >> Keyless system(Honda)
Is the ignition turned on by pressing Start button twice? No
Press and hold Start button.
The ignition is switched on, please release the engine start/stop switch.
Click "All keys lost".
Autel IM608 II registration condition
1. There is no DTCs.
2. Here must be all keyless remotes which want to register. One keyless remote have to be in vehicle.
Notes when registering
Be sure the following to decrease the source of noise as much as possible while registering the keyless remote. Turn OFF switches such as a navigation system and audio. Separate the for diagnostic tool from the keyless remote as much as possible approximately 1m(3 feet). Close all windows, sunroofs and doors.
Please turn the ignition switch off.
(Don't press the foot brake and press the engine start/stop button.)
Place a key to be learned in the vehicle and take all other keys out of the vehicle to a place more than 5m away.
Is the ignition turned on by pressing Start button twice? No
Press and hold Start button.
The ignition is switched on. Please release the engine start/stop switch.
Enter the numbers of keys to be programmed: 1
Please turn the ignition switch off.
(Don't press the foot brake and press the engine start/stop button.)
Please turn the ignition switch on.
(Don't press the foot brake and press the engine start/stop button twice.)
Are both the keyless access and immobilizer indicator lights turned off? Yes
Please turn the ignition switch off.
(Don't press the foot brake and press the engine start/stop button.)
Please turn the ignition switch on.
(Don't press the foot brake and press the engine start/stop button twice.)
The registration is completed.
Please turn the ignition switch off.
(Don't press the foot brake and press the engine start/stop button.)
Check all keyless access remotes to ensure each will start the engine.
Check all keyless access remotes to ensure each will lock and unlock the doors.
Please turn the ignition switch on.
(Don't press the foot brake and press the engine start/stop button twice.)
Completed.
