Product Description
100% Original Autel XP400 Key and Chip Programmer XP400 VCI Dongle IMMO Key Reprogramming Tool work with Autel MAXIIM IM508 IM608.
100% Original Autel XP400 Key and Chip Programmer XP400 VCI Dongle IMMO Key Reprogramming Tool for Autel MAXIIM IM508 IM608
Why Buy Autel XP400?
1. If your original XP400 for IM608 / IM600 is broken, you can buy this to replace the old one.
2. With XP400, You can release more function for your IM508: If you have a MaxiIM IM508 or Otosys IM100, you want to do advanced IMMO reprogramming like IM608 / IM600 do, you can buy an XP400 for your machine. Then it works on IMMO functions as im608 / im600. Detailed functions comparison between XP400 and XP200, please refer to bellow chart.
Free Download Autel XP400 User Manual.pdf
XP400 tip: CANNOT connect with the car, otherwise it will need to return for repair and the fee is on the customer's duty.
![Autel XP400 Key and Chip Programmer](/upload/pro/19082915670719175591.jpg)
Attention Please:
![Autel XP400](/upload/pro/19082915670719556434.png)
XP400 Key & Chip Programmer Function List:
1. Support PC
2. MCU / EEPROM Chips Read / Write
3. ECU Read / Write
4. MC9S12 Encryption Chip Read / Write
5. Key Read / Write
6. Mercedes Infrared Key Read / Write
7. Remote Frequency Detect
8. IC Card Read/Write
XP400 KEY & CHIP PROGRAMMER Introduction, click
here.
DB 26-Pin Port:
Five components can be connected to this port:
Mercedes Infrared Cable
APA102 – Remote Match Cable (optional)
APA104 – ECU Cable
APA105– MCU Cable
APA106 – MC9S12 Cable
APA102 – Remote Match Cable (optional)
No. |
Color |
Definition |
Pin correspond to DB26 |
Note |
1 |
Red |
VCC5V |
16 |
|
2 |
Black |
GND |
3/10/25 |
|
3 |
Blue and White |
REMOTE_MISO |
14 |
|
4 |
Gray and White |
REMOTE_MOSI |
5 |
|
5 |
Brown and White |
REMOTE_CLK |
23 |
|
6 |
Green and White |
REMOTE_RX_C S |
15 |
|
APA104 – ECU Cable
No. |
Color |
Definition |
Pin correspond to DB26 |
Note |
1 |
Red |
VCC12V |
7 |
|
2 |
Black |
GND |
25 |
|
3 |
Green |
IGN |
/ |
|
4 |
Orange |
CANL |
8 |
|
5 |
Blue |
CANH |
17 |
|
6 |
Brown |
BOOTM |
/ |
|
7 |
Yellow |
K |
18 |
|
8 |
White |
LIN |
26 |
|
APA105 – MCU Cable
No. |
Color |
Definition |
Pin correspond to DB26 |
Note |
1 |
Red and White |
VPP1 |
20 |
|
2 |
Red and Black |
VPP2 |
12 |
|
3 |
Red and Yellow |
+12V |
7 |
|
4 |
Red and Blue |
VPPR |
/ |
|
5 |
Black |
GND |
25 |
|
6 |
White |
S1 |
14 |
|
7 |
Brown |
S2 |
5 |
|
8 |
Gray |
S3 |
23 |
|
9 |
Blue |
S4 |
11 |
|
10 |
Red |
S5 |
21 |
|
11 |
Orange |
S6 |
13 |
|
12 |
Purple |
S7 |
4 |
|
13 |
Yellow |
S8 |
19 |
|
14 |
Green |
S9 |
2 |
|
15 |
Black |
GND |
10 |
Shielded Twisted |
16 |
White |
OSC |
1 |
Shielded Twisted |
APA106 – MC9S12 Cable
No. |
Color |
Definition |
Pin correspond to DB26 |
Note |
1 |
Red |
+5V |
16 |
|
2 |
Black |
GND |
25 |
|
3 |
Green |
XCLKS |
2 |
|
4 |
Blue |
T/R |
11 |
|
5 |
Yellow |
RESET |
19 |
|
6 |
Black |
GND |
10 |
Shielded Twisted |
7 |
White |
OSC |
1 |
Shielded Twisted |
Cross-shaped Signal Pin: Places MCU board, MCU spare cable or DIY signal cable to read or write MCU and ECU chips.
IC Card Induction Area: Reads and writes IC card information.
Vehicle Key Slot: Holds the vehicle key to read or write vehicle key information.
Transponder Slot: Holds the transponder to read or write transponder information.
Remote Control Transponder Induction Area: Reads and writes remote control transponder information.
Mercedes Infrared Key Slot: Holds Mercedes infrared key to read or write Mercedes vehicle key information.
Status LED: Shows the current operating status of the XP400. See the table below for detailed description.
Indicator |
Status |
Description |
On |
Light Green |
Powered on and default |
Flash Green |
Communication |
Light Red |
Error |
Locker : Places EEPROM chip or socket to read or write EEPROM information.
EEPROM Component Transponder Slot : Holds the EEPROM plug-in transponder or EEPROM socket.
Specifications:
Item |
Description |
Operating Temperature |
-10℃ ~ 60℃ (14℉ ~ 140℉) |
Storage Temperature |
-20℃ ~ 60℃ (-4℉ ~ 140℉) |
Port |
Mini USB, VGA_DB15 |
Input Voltage |
5 VDC |
Operating Current |
< 250 mA |
Maximum Consumption |
1 W |
Device Dimensions (L*W*H) |
130 mm * 68 mm * 28 mm |
Package Dimensions (L*W*H) |
201 mm * 167 mm * 75 mm |
Net Weight |
466 g |
Package includes:
1pc x AUTEL XP400
Secondhand 95% New Tools
2024 Autel Software Subscription Mega Sale
![mega sale](/upload/advs/24062817195603122999.jpg)
2024 Newest 900 Series - US/ UK/ EU Free Shipping, Fast and No tax!
![900](/upload/advs/24042517140297875135.jpg)
APB131 / MaxiEV are Pre-Order NOw.
Two Years Free Update: for IM608 II, Elite II Pro, Elite II, Ultra Lite, Ultra Lite S, MP808S, MP808Z-TS, MP808BT PRO, OTOFIX D1, OTOFIX D1 Lite, OTOFIX IM1, OTOFIX IM2, OTOFIX D1 MAX, OTOFIX D1 Pro, OTOFIX EvoScan Ultra.![](/wholesale/autel-maxisys-elite-ii.html)
Autel FAQ FB
![Autel FAQ FB](/upload/advs/23011416736823023819.jpg)
Contact information:
Whatsapp: +86-13559259264
Email: sales@Autelsale.com
If you have any problems, please do not hesitate to contact us. We respond to our email on 7/24.
Tech Support
XP400 "Inquire and Bind"-Solution
XP400 "Inquire and Bind"-Solution
Q: Hi, when my use my MaxiIM IM508 with XP400, it display as "Inquire and Bind", should I bind XP400 with my IM508? How to do that? The error messge is as following. If i connect with my laptop, not works either.
![versions](/upload/service/20121716082559052945.jpg)
A: No need to bind them together, just ignore that message. Just use it directly.